Eagle
Features
- Simultaneous detection of up to 6 different gases
- Wide variety of field proven gas sensors available
- IR Sensors available for CO2 , % LEL CH4 , and 0-100% volume CH4
- Transformer testing version available
- PPM / LEL hydrocarbon detection
- Powerful long-life pump with125’ range
- Low flow pump shut off and alarm
- Methane elimination switch for environmental use
- Security “Adjustment Lockout Switch”
- Up to 30 hours of continuous operation
- Alkaline or Ni-Cad capability
- Ergonomic RFI/EMI/Chemical resistant case
- Datalogging option
- Autocalibration
- Intrinsically safe design, CSA/NRTL & UL Classified
The EAGLE’s ergonomic design offers easy access to controls such
as autocalibration, alarm silence, demand zero, peak hold and a wide
variety of other features. Each channel has 2 alarm levels plus TWA and
STEL alarms for toxic channels. Alarm levels are adjustable and can be
latching or self resetting.
Standard features on the EAGLE are not available on most other competitive
units such as PPM/LEL hydrocarbon detection (5 ppm resolution) and a
methane elimination switch for environmental applications. For quick
response and recovery, the EAGLE has a strong internal pump which can
draw samples from over 125 feet. The EAGLE will con-tinuously operate
for over 30 hours on alkaline batteries or 18 hours on Ni-Cads. Many
accessories such as long hoses, special probes, datalogging, continuous
operation adapters, remote alarms and strobes, dilution fittings, inter-nal
hydrophobic filter, etc, are available to help satisfy almost any application.
Rugged, weather resistant, easy to operate and maintain, the EAGLE is
the industry’s answer to portable gas detection in many applications,
including land surey.
| Enclosure | Weather resistant, chemical resistant, RF/EMI coated high impact polycarbonate polyester blend. Can be set in rain or into 2.5 inches of water without damage. Ergonomically balanced with rugged top mounted handle. |
| Dimensions | 10.5" long x 5.9" x 7" tall |
| Weight | 5 lbs. |
| Detection Principle | Catalytic combustion, electrochemical cell, galvanic cell, and infrared. |
| Sensor Life | 2 years under normal conditions. |
| Sampling Method | Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH. |
| Display | 4 x 20 LCD readout with backlighting. Viewed through window in case top. Displays readings & status of all channels simultaneously. |
| Alarms | 2 alarms per channel plus TWA and STEL alarms. Fully adjustable for levels, latching or self reset and silenceable. |
| Alarm Method | Buzzer 85dB at 30 cm, dual high intensity LED’s, and blinking display. |
| Controls | 6 external push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA /STEL values, battery status and many other features. |
| Continuous Operating Hours | 30 hours minimum using alkaline batteries, or 18 hours using Ni-Cads. |
| Power Source | Size D batteries, 4 alkaline or Ni-Cad. Charger has alkaline recognition to prevent battery damage if alkalines are charged. |
| Operating Temp. & Humidity | -10°C to 40°C (14°F to 104°F), 0 to 95% RH, non-condensing. |
| Indication Accuracy | Maximum variance +/- 5% of full scale. |
| Response Time | 30 seconds to 90% (for most gases). |
| Safety Design | Intrinsically Safe, Class I, Division 1, Groups A, B, C and D. CSA / NRTL & UL Classified (most versions). |
| Standard Accesories | Shoulder strap, alkaline batteries, hydrophobic probe,
and 5 foot hose (for special toxic gas versions, shorter teflon hose
used without probe). |
| Optional Accessories | • Datalogging of up to 4 gases (No datalogging
possible on 5 or 6 gas versions or versions with more than 2 toxic sensors) • Remote alarm • Dilution fitting (50/50) • Ni-Cad batteries • Battery charger, 115 VAC, 220 VAC, or 12 VDC • Continuous operation adapter, 115 VAC or 12 VDC • Extra loud buzzer • Extension probes • Internal hydrophobic filter (strongly recommended) |
| Warranty | One year material and workmanship |
Gases & Detectable Ranges
| Standard Confined Space Gases | |
|---|---|
| Hydrocarbons | 0 - 100% LEL 0 - 50,000 ppm |
| Oxygen (O2 ) | 0 - 40% Vol. |
| Carbon Monoxide (CO) | 0 - 500 ppm |
| Hydrogen Sulfide (H2S) | 0 - 100 ppm |
| Super Toxics and Other Gases | |
| Ammonia (NH3 ) | 0 - 75 ppm |
| Arsine (AsH3 ) | 0 - 1 ppm 0 - 200 ppb |
| Carbon Dioxide (CO2 ) (I R Sensor) | 0 - 5,000 ppm 0 - 10,000 ppm 0 - 5% Vol. 0 - 20% Vol. 0 - 50% Vol. |
| Chlorine (Cl2 ) | 0 - 3 ppm |
| Chlorine Dioxide (ClO2 ) | 0 - 1 ppm |
| Fluorine (F2 ) | 0 - 5 ppm |
| Hydrogen Fluoride (HF) | 0 - 9 ppm |
| Hydrogen Chloride (HCl) | 0 - 15 ppm |
| Hydrogen Cyanide (HCN) | 0 - 30 ppm |
| Methane (CH4 ) (I R Sensor) | 0 - 100% LEL 0 - 100% Vol. |
| Nitrogen Dioxide (NO2 ) | 0 - 15 ppm |
| Ozone (O3 ) | 0 - 1 ppm |
| Phosphine (PH3 ) | 0 - 1 ppm |
| Silane (SiH4 ) | 0 - 15 ppm |
| Sulfur Dioxide (SO2 ) | 0 - 30 ppm |
| The EAGLE can be provided with up to 6 gas sensors (4 Toxics maximum). Please specify gas combination when ordering. |
|
| Special Features |
|---|
|