FP-30 and FP40
Features
- Simple operation
- Specific to Formaldehyde
- Built-in sample draw pump
- Easy to read LCD display
- Self-diagnosis
- Uses photoelectric photometry technology
- Direct digital readout
- Colorimetric detection tablet method
- No false readings from interfering gases
- Operates on 4 AA alkalines
- Stores 99 readings
- No warm up time
Applications
- Furniture and woodworking
- Coating and varnishing
- Engineered wood products
- Medical / veterinary
- Painting & corrosion resistant finishes
- Carpet manufacture & storage
- Adhesives
- Heat treatment operations
Model Name |
FP-30 | FP-40 | ||
|---|---|---|---|---|
| Measuring Gas | Formaldehyde (HCHO) in air | |||
| Detection Range |
0-0.4 ppm (0.005 ppm/digit) |
0-1.0 ppm (0.01 ppm /digit) |
0 – 0.6 ppm |
|
| Detection Time |
30 minutes (1,800 sec.) | 15 minutes (900 sec.) |
3 min. (180 sec.) |
|
| Detection Principle |
Photoelectric photometry method | |||
| Detection Method |
Colorimetric tablet method (Accumulations measurement) | |||
| Display | Digital LCD | |||
| Sampling Method |
Sample drawing with built-in pump |
|||
| Operating Temp. & Humidity |
-10 ~ 40°C (14 ~ 104°F), below 90%RH |
5 ~ 35°C, below 90%RH (non-condensing) |
||
| Memory | Detection point: Up to 99 points |
|||
| Self-diagnosis | Failure of light source and light receiver, low battery voltage, pump failure, system trouble |
|||
| Power Source | AA size Alkaline batteries (4 pcs.) | |||
| Continuous Operation |
Approx. 12 hours (With no alarm or backlight, with alkaline batteries at 20°C) |
|||
| Dimension | Approx. 85(W) x 190(H) x 40(D)mm, 3.35(W) x 7.48(H) x 1.57(W) |
|||
| Weight | 500g, 17.6 oz | |||
| Standard Accessories |
|
|||
| Warranty | One year material and workmanship |
|||